By using 3D NAND Flash and three-dimensional stacking method and DRAM cache, the random read/write performance of S700 Pro has improved 20% compared with S700 series and is more reliable and durable. Whether for playing MMO or editing software design, HP S700 Pro series provides better performance, help to save your time and improve work efficiency.
The advanced dynamic wear leveling and static wear leveling of HP S700 Pro series increase the TBW (TBW, Total Bytes Written) and improve the durability of SSD. Wear Leveling can avoid repeated erase/write to the same storage area and prevent damage of the storage unit. With large capacity DDR3 cache, S700 Pro series can effectively decrease the write amplification penalty and prolong the service life of the S700 PRO SSD.
HP S700 Pro series conforms to strict HP internal firmware writing processes and security focus. Professional level secure key at the firmwaref level can effectively prevent Trojan virus and prevent unwanted invasion from hackers.
HP S700 Pro series supports LDPC (Low Density Parity Check Code) error correction mechanism. It can do high speed parallel decoding, real-time error correction, which ensures the security and integrity of data transmission. LDPC can also significantly extend product durability.
HP S700 Pro series supports DEVSLEEP power supply mode. DEVSLEEP allows the drive to "wake" faster from idle state. The power consumption is less than 5mW under DEVSLEEP mode, which significantly saves system power consumption in standby status and thus achieves both speed and endurance. HP S700 Pro series can help your laptop battery last longer on a single charge. No moving parts within the SSD means your computer can operate at a lower temperature and achieve virtually noiseless operation.
HP adheres to strict storage drive testing standards. All HP S700 Pro series products have undergone performance test, compatibility test, reliability test, power-off protection test, application test and other rigorous tests before product can leave the factory floor. HP S700 series SSD support HP computer DST self test, which improves product performance and ensures product stability in actual use.
|Model||HP SSD S700 Pro M.2|
|Interface/ Protocol||SATA 6.0 Gb/s|
|Flash||3D NAND Flash|
|Sequential Read/Write||256GB — Up to 563 / 510MB/s.|
|Random 4 KB Read/Write||256GB — Up to 80,000 / 90,000 IOPS.|
|Power Consumption||440 mW (Idle) / 2.51W (Max)|
|Non-Operating Temperature||-40°C ~ 85°C|
|Operating Temperature||0°C ~ 70°C|
|Dimensions||80 x 22 x 3.8mm|
|Shock||100 G/6 msec (operating and non-operating)|
|Vibration||3.1G RMS (2-500 Hz) (operating and non-operating)|
|Support||3 years warranty, free technical support|
|*The speed tests were conducted in HP LABS. Actual end user results may vary due to different system or hardware environments.|